Table of Contents
Advertisement
Chapter 6. Creating a Rhythm Set
Compare Function
You can use the Compare function during the Rhythm
Key Copy operation. The Compare function allows you
to play the Rhythm Set currently occupying the copy
source.
To do so, press [UNDO] to access the RHYTHM
COMPARE page. The new Rhythm Set can also be
selected from the RHYTHM COMPARE page – however,
it is not possible to select patches from XP-A–F. After
selecting the desired Rhythm Set, return to the previous
page by pressing [UNDO] or [EXIT].
fig.6-13.e
Copy source Rhythm Set (group, number, name)
* If one of the TEMP Rhythm Sets is selected as the source
Rhythm Set (Source), the Compare function is not
available.
* Please be aware that when the Compare function plays a
Rhythm Set, it may sound slightly different than when it
is played normally.
Rhythm Set Name Copy
You can copy the name of a Rhythm Set to the current
Rhythm Set.
fig.6-14.e
Copy source Rhythm Set (group, number, name)
1. Select the Rhythm Set(destination) whose name you
wish to copy.
2. Press [UTILITY] to make its indicator light.
3. Press [u] / [d] to select the UTIL 1 page.
4. Use [l] / [r] to make "COPY" blink, and then press
[ENTER].
5. Press [u] / [d] to select the PATCH NAME CPY
page.
6. Turn the VALUE dial or press [INC] / [DEC] to
select the source Rhythm Set.
7. Press [ENTER] to execute the Copy operation.
120
Advertisement
Table of Contents
