Table of Contents
Advertisement
Settings Common to an
Entire Rhythm Set
Setting Procedure:
1. Select the Rhythm Set you wish to edit.
2. Press the [COMMON] function select button.
3. Use [
]/[
] to select the page containing the
parameter you want to set.
4. Use [
]/[
] to move the cursor to the parameter.
5. Turn the VALUE dial or press [INC]/[DEC] to select the
desired value.
6. Press [EXIT] to return to the RHYTHM PLAY page.
RHYTHM NAME
You can name a Rhythm Set using up to 12 alphanumeric
characters.
Use [
]/[
] to move the cursor, and then turn the
[VALUE] knob or press [INC]/[DEC] to select the desired
character.
Available characters/symbols:
space, A–Z, a–z, 0–9, ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ]
^ _ ? |
Press [SHIFT] to display the following in the bottom right
corner of the screen.
fig.6-02
A
a: Switches between uppercase and lowercase
characters.
INS:
Inserts a space at the cursor location and shifts the
remaining text to the right by one character position.
DEL:
Deletes the character at the cursor and shifts the
remaining text one character position to the left.
Press each of these buttons in order to execute its
corresponding function (refer to the figure).
fig.6-03.e
Chapter 6. Creating a Rhythm Set
RHYTHM COMMON
Level (Rhythm level) 0–127
This sets the overall volume of the Rhythm Set.
* To set the volume of each Rhythm Tone, use the Tone Level
(TVA p. ???).
Output Assign (Rhythm output assign)
This sets the output destination of the Rhythm Set.
MFX: The Rhythm Set is sent into the Multi-Effects.
OUTPUT A–C: The Rhythm Set is sent to the selected pair of
OUTPUTs, A–C.
INDIV 1–6: The Rhythm Set is sent to the selected
INDIVIDUAL output jack, 1–6.
TONE: Each Rhythm Tone in the Rhythm Set is sent to its
programmed output destination.
RHYTHM TEMPO
Clock Source (Rhythm clock source)
The LFO cycle, M-FX changes, phrase loop (break beats), and
Tone delay time can be synchronized to a clock, or tempo.
The Clock Source setting selects the timing reference to be
used by the Rhythm Set.
PATCH: The Rhythm Set Tempo will be used.
SYSTEM: The global System Tempo or clock messages
received from an external sequencer will be used.
Tempo (Rhythm Tempo)
When Clock Source is set to "RHYTHM," this setting
establishes the Patch's tempo.
* Clock messages for the Rhythm Tempo are not transmitted
from the MIDI OUT jack.
111
Advertisement
Table of Contents
