Roland XV-3080 Owner's Manual page 43

128 voice 6 x expansion
Hide thumbs Also See for XV-3080:
Table of Contents

Advertisement

sound will be output, and with a setting of D0:100W only the
chorus sound will be output.
Level (Output Level)
Adjust the output level.
12: TREMOLO CHORUS
Tremolo Chorus is a chorus effect with added Tremolo
(cyclic modulation of volume).
fig.2-15
L in
Balance D
Tremolo Chorus
R in
Balance D
Pre Dly (Pre Delay Time)
Adjust the time delay from when the direct sound begins
until the chorus sound is heard.
ChoRate (Chorus Rate)
Adjust the modulation speed of the chorus effect.
Cho Dpt (Chorus Depth)
Adjust the modulation depth of the chorus effect.
Phase (Tremolo Phase)
Adjust the spread of the tremolo effect.
TrmRate (Tremolo Rate) #
Adjust the modulation speed of the tremolo effect.
Trm Sep (Tremolo Separation)
Adjust the spread of the tremolo effect.
Balance (Effect Balance) #
Adjust the volume balance between the direct sound and the
tremolo chorus sound. With a setting of D100:0W only the
direct sound will be output, and with a setting of D0:100W
only the tremolo chorus sound will be output.
Level (Output Level)
Adjust the output level.
L out
Balance W
Balance W
R out
Chapter 2 Using the XV-3080 Effects
13: SPACE-D
Space-D is a multiple chorus that applies two-phase
modulation in stereo. It gives no impression of modulation,
but produces a transparent chorus effect.
fig.2-16
Balance D
L in
Space D
Space D
R in
Balance D
Pre Dly (Pre Delay Time)
Adjust the time delay from when the direct sound begins
until the processed sound is heard.
Rate #
Adjust the rate of modulation.
Depth
Adjust the depth of modulation.
Phase
Adjust the spatial spread of the sound.
LowGain
Adjust the gain of the low frequency range.
Hi Gain
Adjust the gain of the high frequency range.
Balance (Effect Balance) #
Adjust the volume balance between the direct sound and the
chorus sound. With a setting of D100:0W only the direct
sound will be output, and with a setting of D0:100W only the
chorus sound will be output.
Level (Output Level)
Adjust the output level.
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents