Table of Contents
Advertisement
MIDI Implementation
pp=3 LFO Pitch Depth
rr = 00H - 7FH 0 - 600[cents]
pp=4 LFO Filter Depth
rr = 00H - 7FH 0 - 2400[cents]
pp=5 LFO Amplitude Depth
rr = 00H - 7FH 0 - 100%
F7H
EOX (End Of Exclusive)
Controller
Status
Data byte
F0H
FH,7FH,09H,03H,0nH,ccH,ppH,rrH
Byte Explanation
F0H
Exclusive status
7FH
ID number (universal realtime message)
7FH
Device ID (Broadcast)
09H
Sub ID#1 (Controller Destination Setting)
03H
Sub ID#2 (Control Change)
0nH
MIDI Channel (00 - 0F)
ccH
Controller number (01 - 1F, 40 - 5F)
ppH
Controlled parameter
rrH
Controlled range
pp=0 Pitch Control
rr = 28H - 58H -24 - +24[semitones]
pp=1 Filter Cutoff Control
rr = 00H - 7FH -9600 - +9450[cents]
pp=2 Amplitude Control
rr = 00H - 7FH 0 - 200%
pp=3 LFO Pitch Depth
rr = 00H - 7FH 0 - 600[cents]
pp=4 LFO Filter Depth
rr = 00H - 7FH 0 - 2400[cents]
pp=5 LFO Amplitude Depth
rr = 00H - 7FH 0 - 100 %
F7H
EOX (End Of Exclusive)
Scale/Octave Tuning Adjust
Status
Data byte
F0H
7EH,7FH,08H,08H,ffH,ggH,hhH,ssH...
Byte Explanation
F0H
Exclusive status
7EH
ID number (Universal Non-realtime Message)
7FH
Device ID (Broadcast)
08H
Sub ID#1 (MIDI Tuning Standard)
08H
Sub ID#2 (scale/octave tuning 1-byte form)
ffH
Channel/Option byte1
bits 0 to 1 = channel 15 to 16
bit 2 to 6 = Undefined
ggH
Channel byte2
bits 0 to 6 = channel 8 to 14
hhH
Channel byte3
bits 0 to 6 = channel 1 to 7
ssH
12 byte tuning offset of 12 semitones from C to B
00H = -64 [cents]
40H = 0 [cents] (equal temperament)
7FH = +63 [cents]
F7H
EOX (End Of Exclusive)
Key-Based Instrument Controllers
Status
Data byte
F0H
7FH,7FH,0AH,01H,0nH,kkH,nnH,vvH ... F7H
Byte Explanation
F0H
Exclusive status
7FH
ID number (universal realtime message)
7FH
Device ID (Broadcast)
0AH
Sub ID#1 (Key-Based Instrument Control)
01H
Sub ID#2 (Controller)
0nH
MIDI Channel (00 - 0F)
kkH
Key Number
nnH
Control Number
vvH
Value
178
F7H
Status
F7H
* This parameter affects drum instruments only.
This instrument can use exclusive messages to exchange many varieties of internal settings
with other devices.
he model ID of the exclusive messages used by this instrument is 00H 10H.
This message requests the other device to transmit data. The address and size indicate the
type and amount of data that is requested.
When a Data Request message is received, if the device is in a state in which it is able to
transmit data, and if the address and size are appropriate, the requested data is transmitted
as a Data Set 1 (DT1) message. If the conditions are not met, nothing is transmitted.
status
F0H
Byte Explanation
F0H
41H
dev
00H
10H
11H
aaH
Status
bbH
F7H
ccH
ddH
ssH
ttH
uuH
vvH
sum
F7H
* The size of data that can be transmitted at one time is fixed for each type of data. And
* For the checksum, refer to (p.$$$).
* Not received when the Receive Exclusive parameter (SYSTEM/COMMON) is OFF.
Status
F0H
Status
Byte Explanation
F0H
41H
dev
00H
10H
12H
aaH
bbH
ccH
ddH
nn=07H Level
vv = 00H - 7FH 0 - 200% (Relative)
nn=0AH Pan
vv = 00H - 7FH Left - Right (Absolute)
nn=5BH Reverb Send
vv = 00H - 7FH 0 - 127 (Absolute)
nn=5D Chorus Send
vv = 00H - 7FH 0 - 127 (Absolute)
EOX (End Of Exclusive)
Data Transmission
Data Request 1
RQ1 (11H)
data byte
41H, dev, 00H, 10H, 11H, aaH, bbH,
ccH, ddH, ssH, ttH, uuH, vvH, sum
Exclusive status
ID number (Roland)
devdevice ID (dev: 10H - 1FH, 7FH)
model ID #1 (XV-3080)
model ID #2 (XV-3080)
commandID (RQ1)
address MSB
address
address
address LSB
size MSB
size
size
size LSB
checksum
EOX (End Of Exclusive)
data requests must be made with a fixed starting address and size. Refer to the address
and size given in "Parameter Address Map (p.$$$)".
Data set 1
DT1 (12H)
Data byte
41H, dev, 00H, 10H, 12H, aaH, bbH, ccH, F7H
ddH, eeH, ... ffH, sum
Exclusive status
ID number (Roland)
Device ID (dev: 00H - 1FH, Initial value is 10H)
Model ID #1 (XV-3080)
Model ID #2 (XV-3080)
Command ID (DT1)
Address MSB: upper byte of the starting address of the data to be sent
Address: upper middle byte of the starting address of the data to be sent
Address: lower middle byte of the starting address of the data to be sent
Address LSB: lower byte of the starting address of the data to be sent.
status
F7H
Status
Advertisement
Table of Contents
