Mounting Of External Air Supply - SCAN 1002 Assembly And Instruction Manual

MOUNTING OF EXTERNAL AIR SUPPLY

To dismount the cover plates for the Ø100 mm sleeve, use an ordinary screwdriver as shown below. Tilt the screwdriver and
loosen the cover plates.
External combustion air on
the bottom of the cassette
MOUNTING OF EXTERNAL AIR SUPPLY ON THE REAR OF THE CASSETTE
NAVN:
Scan 1001 Kassette
EMNE:
MATERIALE:
DIMENSION:
STI:
Ekstern forbrænding bag på svøb
EMNE:
18
Scan 1001 Frisklufttilførsel bund af ovn
EMNE:
N/A
VÆGT:
C:\Working Folder\Designs\Scan 1001\91001032.idw
N/A
AREAL:
N/A
VÆGT:
N/A
AREAL:
External air supply on
the rear of the cassette
TG.NR:
91001020
TG.NR:
N/A
VÆGT: DATO: 07-05-2012
24-04-12
DATO: SIGN:
N/A
AREAL:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
Krog Iversen & Co A/S
1
DK-5492 Vissenbjerg©
Mount the Ø100 sleeve
91001037
TG.NR:
15-05-12 BC
DATO: SIGN:
Krog Iversen & Co A/S
2
DK-5492 Vissenbjerg©
Hitch the combustion air box on the
rear plate of the cassette.
This box must always be mounted
when connecting the insert with
external air supply.
Mount the insert in the cassette
(see page 21)
4 x self-tapping screws 4.2 x 6.5 mm
91001032
BC
SIGN:
BC