Fitting Without The Convection Connection Pieces; Fitting The Convection Connection Pieces - SCAN 1002 Assembly And Instruction Manual

FITTING WITHOUT THE CONVECTION CONNECTION PIECES

The cover plates in the top plate can be removed in order to reduce the temperature on the wall above the insert. If the insert is
built into an existing fireplace the cover plates are not to be removed.
To dismount the cover plates for the convection air, use a slotted screwdriver as illustrated below. Tilt the screwdriver down-
wards and loosen the cover plate. Fit and tighten the cassette, see "Fitting the cassette".

FITTING THE CONVECTION CONNECTION PIECES

1
Convection connection pieces Ø149 mm
To dismount the cover plates for the convection adaptors, use an slotted screwdriver as shown below. Tilt the screwdriver and
loosen the cover plates.
Afmontage dækplader i topplade
EMNE:
N/A
VÆGT:
2
N/A
AREAL:
Fit and tighten the cassette, see "Fitting the cassette".
When the cassette has been tightened, fit the convection connection pieces. Fit these and tighten them through the hole for the
flue connection piece.
20
Afmontage konvektionsdækplader
EMNE:
Afmontage dækplader i topplade
Scan 1001
NAVN: EMNE:
MATERIALE:
DIMENSION:
C:\Working Folder\Designs\Scan 1001\91001046.idw
STI:
(ACCESSORY)
91001046
TG.NR:
BC
30-10-12
DATO: SIGN:
Krog Iversen & Co A/S
Scan 1001 Afmontage konvektionsdækplader
NAVN: EMNE:
DK-5492 Vissenbjerg©
MATERIALE:
DIMENSION:
C:\Working Folder\Designs\Scan 1001\91001022.idw
STI:
91001022
TG.NR:
91001046
TG.NR:
N/A 30-10-12 BC
VÆGT: DATO: SIGN:
N/A
AREAL: Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
Scan 1001
NAVN:
MATERIALE:
DIMENSION:
C:\Working Folder\Designs\Scan 1001\91001047.idw
STI:
Fastening points
N/A 25-04-12
VÆGT: DATO:
N/A
AREAL: Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
Scan 1001
NAVN:
MATERIALE:
DIMENSION:
C:\Working Folder\Designs\Scan 1001\91001023.idw
STI:
Cassette without cover plates
in the top plate
Konvektionshuller i topplade
EMNE:
VÆGT:
N/A
AREAL:
Cassette without cover plates
91001022
TG.NR:
BC
SIGN:
6 x Allen screws M4x10
Hul i svøb for konvektion
EMNE:
N/A
VÆGT:
6 x Flange nuts M4
N/A
AREAL:
N/A
DATO: 30-10-1
Krog Iverse
DK-5492 Vi
TG.NR
DATO: 25-04-12
Krog Iversen & C
DK-5492 Vissenb