Page 1
5004-S FRL UK - ASSEMBLY AND INSTRUCTIONS MANUAL SCAN 5004-S FRL ASSEMBLY AND INSTRUCTION MANUAL SCAN 5004-S FRL...
Page 2
5004-S FRL CONGRATULATIONS ON YOUR NEW SCAN BUILT-IN STOVE You have purchased a product by one of Europe’s leading manufacturers of wood-bur- ning stoves, and we are sure that you will have years of pleasure from your purchase. To make the best possible use of your stove, it is important that you follow our advice and instructions.
CONTENTS ¬ ¬ TECHNICAL DATA Installation Dimension sketch Scan 5004-S FRL Safety Type plate Technical data and dimensions Product registrationumber ¬ ¬ ASSEMBLY Tools for the mounting of the built-in stove Safety distance Loose parts Distance to flammable materials Additional accessories...
Any changes made to the product by the dealer, fitter or user could result in the product and safety functions not functioning as intended. The same applies to the fitting of accessories or extra equipment not supplied by Scan A/S. This could also be the case if parts that are necessary for the operation and safety of the stove are dismantled or removed.
Surface treatment Senotherm No x @ 13% O mg/Nm Max. log length 40 cm Efficiency Weight Scan 5004-S FRL 317 kg Energy efficiency index 111,2 Flue conn. piece internal diameter 175 mm Energy efficiency class Flue conn. piece external diameter...
DIMENSION SKETCH SCAN 5004-S FRL Height to the beginning of flue connecting piece at top outlet Centre of fresh air intake - Inside measure: 132 mm, Outside measure: 149 mm Flue conn. piece - Inside measure: 175 mm, Outside measure: 200 mm All measures are in mm *NB –...
PRODUCT REGISTRATIONUMBER All Scan built-in stoves are provided with a product registration number. Please make a note of this number at the rear page of this manual; you will always need to quote it when contacting your dealer or Scan A/S.
¬ Heat shields/convection covers (see page 15) DISPOSAL OF PACKAGING Your Scan built-in stove may come supplied with the following packaging: The wood packaging can be reused and after final use can be incinerated as a CO neutral Wood packaging product or sent for recycling.
Scan 5003-S FL Your local Scan dealer can advise you on regulations concerning protection of flammable materials in the vicinity of your stove. The floor plate’s function is to protect the floor and flammable material against any sparks that may occur.
EXISTING CHIMNEY AND PRE-FABRICATED ELEMENT CHIMNEY If you intend to connect your stove to an existing chimney, it makes sense to contact an authorised Scan dealer, or a local chim- ney sweep, for advice. These experts will also let you know if your chimney needs renovating.
FRESH AIR BOX FOR FLOOR (ACCESSORY) A fresh air box is available as an accessory. For this box, you need a connection pipe (Ø 150 mm) which can be purchased in most D.I.Y.-stores. Drawing Friskluftsadapter Scan 5004 FRL 04-02-2019 95004093 Stove: Name: Date:...
The door is delivered without self-closing function (Bauart 1). If you want a self-closing door, you can remove a disc from the counterweight. First remove the screws and the cover plates at the rear of the fireplace. Drawing Låge med selvluk, Scan 5004 FRL Scan 5004 23-11-2017 95004031 Stove: Name:...
MOUNTING OF THE HEAT SHIELDS/CONVECTION COVERS (ACCESSORY) Dismount the screws on top of the fireplace B ( 1 : 4 ) Drawing Montage af varmeskjold, Scan 5004 FRL Scan 5004 Name: Date: 14-11-2017 95004023 Stove: number: Constructed/Changed by: Material: Weight:...
Page 17
MOUNTING OF THE HEAT SHIELDS/CONVECTION COVERS (ACCESSORY) Place the metal plate #2 at the rear of the stove Drawing Montage af varmeskjold, Scan 5004 FRL Scan 5004 14-11-2017 95004029 Stove: Name: Date: number: Constructed/Changed by: D ( 1 : 4 )
N a m e : T e n s o P 1 4 k l i p s D a t e : D r a w i n g Drawing Preload Tenso P 14 værktøj Scan 5003-S FR/FL 04-07-2019 95003066 Stove: Name: Date:...
LIGHTING We recommend the use of fire lighters, or similar products, which are available from your Scan dealer. Using fire lighters helps light the wood more quickly and keeps the combustion process clean. See our video about correct firing on www.scan.dk or scan the QR-code. Please note that this Scan the QR-code video is only intended as a guide.
CONTINUOUS OPERATION It is important to obtain as high a temperature as possible in the combustion chamber. This results in best possible use of the stove and fuel, as well as achieving clean combustion. In this way you will avoid build-up of soot on the combustion chamber lining and glass pane.
HANDLING OF THE FUEL SELECTING WOOD/FUEL You can use any type of wood as fuel. However harder woods, such as beech or ash, are generally better for heating, as they burn more evenly and create less ash. Other woods, such as maple, birch and spruce, are excellent alternatives. PREPARATION The best fuel is obtained where the tree has been felled and the wood sawn and split before May 1st.
CHECKING THE STOVE Scan A/S recommends that you check your stove thoroughly after sweeping/cleaning. Check all visible surfaces for cracks. Check that all joints are tight and that the gaskets are correctly seated. Worn or deformed gaskets should be replaced.
A ( 0,13 : 1 ) DISPOSAL OF STOVE PARTS Steel/cast iron Send for recycling Glass Dispose of as ceramic waste Combustion chamber lining Vermiculite and chamotte are not recyclable. Dispose of as waste Baffle plates Vermiculite and chamotte are not recyclable. Dispose of as waste Gaskets Dispose of as waste CLEANING THE GLASS...
Page 34
D ( 1 : 2 ) Pull out the damper over the front glass, and then the two dampers at each side glass E ( 1 : 2 ) C ( 1 Rengøring af glas, Scan 5004 FRL 95004041 EMNE: TG.NR: 12-12-2017 DATO: VÆGT:...
Page 35
TROUBLESHOOTING SMOKE ESCAPING ¬ Damp wood ¬ Chimney not drawing properly ¬ Chimney is not properly dimensioned for the built-in stove ¬ Check if the smoke gas pipe/chimney are blocked ¬ Is the chimney the right height for its surroundings? ¬...
Page 36
You must quote your stove‘s product registration number when you contact us or your authorised Scan dealer with a warranty claim. The warranty covers all parts which in the opinion of Scan A/S require repair or replacement due to manufacturing or construc- tion error The warranty applies to the original purchaser of the product only, and is not transferable (except on prior sale).
Page 40
Product registration number Quote this number at all enquiries Edition: UK 95004501 SCAN A/S Glasvænget 3-9 DK-5492 Vissenbjerg www.scan.dk 29.08.2019...