Table of Contents
Advertisement
FITTING THE FLUE CONNECTION PIECE
The insert is prepared for a top flue outlet from the factory, but the connection piece can be turned around for a rear outlet.
Mount the connecting piece on the insert, after it has been placed in the cassette.
Mount the gasket 3 x 8 mm at the edge of the flange of the connecting piece. Fasten the connecting piece with the flanged nuts
Gasket
Montage røgstuds
EMNE:
AREAL:
FRESH AIR INTAKE
Scan 1001
NAVN:
In a well-insulated house, the air used up by the burning process has to be replaced. This particularly applies to houses with
MATERIALE:
mechanical ventilation. There are different ways of making sure that an air exchange takes place. The most important thing is to
DIMENSION:
ensure that there is a supply of air to the room where the wood stove is located. The external wall vent must be located as close
C:\Working Folder\Designs\Scan 1001\91001025.idw
STI:
to the wood stove as possible, and you must be able to close it when you are not using the wood stove.
Scan 1001
NAVN:
EMNE:
National and local building regulations must be followed with regard to the connection of fresh-air intake.
MATERIALE:
DIMENSION:
C:\Working Folder\Designs\Scan 1001\91001025.idw
CLOSED COMBUSTION SYSTEM
STI:
You should use the closed combustion system for the wood-burning stove if you live in a newly-built, airtight home.
External combustion air is connected through a ventilation pipe via the wall or floor.
It must be possible to shut off the ventilation pipe with a valve, when the stove is not in use. Minimum
maximum length:
metres with a maximum of 3 bends. We recommend smooth steel pipes.
6
NOTE: if the stove has a fresh air connexion or closed combustion, the ventilation pipe must be open, when the stove
is in use!
N/A
26-04-12
VÆGT:
DATO:
N/A
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
Montage røgstuds
EMNE:
N/A
VÆGT:
N/A
AREAL:
Montage røgstuds
N/A
VÆGT:
N/A
AREAL:
4 x flange nuts M6
Scan 1001
NAVN:
EMNE:
MATERIALE:
DIMENSION:
C:\Working Folder\Designs\Scan 1001\91001025.idw
STI:
91001025
TG.NR:
BC
SIGN:
TG.NR:
91001025
BC
DATO:
26-04-12
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
91001025
TG.NR:
BC
DATO:
26-04-12
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
Scan 1001
NAVN:
MATERIALE:
Montage røgstuds
DIMENSION:
N/A
26-04-12
VÆGT:
DATO:
C:\Working Folder\Designs\Scan 1001\91001025.idw
STI:
N/A
AREAL:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
Ø 100
Montage røgstuds
EMNE:
N/A
VÆGT:
91001025
TG.NR:
N/A
AREAL:
BC
SIGN:
mm ventilation pipe,
17
Hide quick links:
Advertisement
Table of Contents
