Toro Reelmaster 5410-D Operator's Manual page 24

Figure 27
3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
(Figure 27B and
until the last digit is entered and press the right
button once more.
4. Press the middle button to enter the PIN code
(Figure 27D).
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
Note:
Rotate the key switch to the O
then to the O position locks the protected menu.
N
You have the ability to view and change the settings in
the Protected Menu. Once you access the Protected
Menu, scroll down to Protect Settings option. Use the
right button to change the setting. Setting the Protect
Settings to O allows you to view and change the
FF
settings in the Protected Menu without entering the
PIN code. Setting the Protect Settings to O
protected options and requires you to enter the PIN
code to change the setting in the Protected Menu.
After you set the PIN code, rotate the key switch O
and back to the O position to enable and save this
N
feature.
Figure 27C). Repeat this step
position and
FF
hides the
N
To Set the Auto Idle
•
In the Settings Menu, scroll down to Auto Idle.
•
Press the right button to change the auto idle time
between OFF, 8S, 10S, 15S, 20S, & 30S.
To Set the Blade Count
•
In the Settings Menu, scroll down to Blade Count
•
Press the right button to change the blade count
between 5, 8 or 11 blade reels.
To Set the Mow Speed
•
In the Settings Menu, scroll down to Mow Speed.
•
Press the right button to select mow speed.
•
Use the center and right button to select the
appropriate mow speed set on the mechanical
mow speed limiter on the traction pedal.
•
Press the left button to exit mow speed and save
the setting.
g028522
To Set the Height of Cut (HOC)
•
In the Settings Menu, scroll down to HOC.
•
Press the right button to select HOC.
•
Use the center and right button to select the
appropriate HOC setting. (If the exact setting is
not displayed, select the nearest HOC setting from
the list displayed).
•
Press the left button to exit HOC and save the
setting.
To Set the Front and Rear Reel
Speeds
Although the front and rear reel speeds are calculated
by inputting the number of blades, mow speed and
HOC into the InfoCenter, the setting can be manually
changed to accommodate for different mowing
conditions.
•
To change the Reel Speed Settings, scroll down to
the F Reel RPM, R Reel RPM or both.
•
Press the right button to change the reel speed
value. As the speed setting is changed, the display
will continue to show the calculated reel speed
based on blade count, mow speed and HOC which
was previously entered, but the new value will also
be displayed.
To Turn Smart Power ON/OFF
FF
•
In the settings menu, scroll down to Smart Power.
•
Press the right button to switch between ON and
OFF.
•
Press the left button to exit.
24