Toro Reelmaster 5410-D Operator's Manual page 21

Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about
your machine, such as the operating status, various
diagnostics, and other information about the machine
(Figure 25). There is a splash screen and main
information screen of the InfoCenter. You can switch
between the splash screen and main information
screen, at any time, by pressing any of the InfoCenter
buttons and then selecting the appropriate directional
arrow.
Figure 25
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—Press this
button to access the InfoCenter menus. You can
use it to back out of any menu you are currently
using.
•
Middle Button—Use this button to scroll down
menus.
•
Right Button—Use this button to open a menu
where a right arrow indicates additional content.
Note:
The purpose of each button may change
depending on what is required at the time. Each
button will be labeled with an icon displaying its
current function.
g020650
3. Middle button
4. Left button
InfoCenter Icon Description
SERVICE DUE
21
Indicates when scheduled service
should be performed
Engine rpm/status—indicates the
engine speed (rpm)
Hour meter
Info icon
Fast
Slow
Fuel level
Stationary regeneration required
Glow plugs are active
Raise cutting units
Lower cutting units
Operator must sit in seat
Parking-Brake Indicator—indicates
when the parking brake is On
Identifies the range as High
(Transport)
Neutral
Identifies the range as Low (Mow)
Coolant Temperature—indicates the
engine-coolant temperature in either
°C or °F
Temperature (hot)
PTO is engaged
Denied or not allowed
Engine start
Stop or shutdown