Toro Reelmaster 5410-D Operator's Manual page 10

110-8924
1. Warning—read the Operator's Manual and receive training.
2. Thrown object hazard—keep bystanders a safe distance
from the machine.
3. Warning—do not park the machine on slopes; engage the
parking brake, lower the cutting units, stop the engine and
remove the ignition key before leaving the machine.
4. Tipping hazard—slow machine before turning, do not turn
at high speeds; lower the cutting unit when driving down
slopes.
5. Warning—read the Operator's Manual, do not tow the
machine.
110-8973
(Affix over part no. 110–8924 for CE*)
* This safety decal includes a slope warning required on the machine for
compliance to the European Lawn Mower Safety Standard EN836:1997. The
conservative maximum slope angles indicated for operation of this machine are
prescribed by and required by this standard.
1. Warning—read the Operator's Manual, do not operate this
machine unless you are trained.
2. Thrown object hazard—keep bystanders a safe distance
from the machine.
3. Tipping hazard—do not operate on slopes greater than 15°;
lower the cutting decks when operating on slopes; wear
the safety belt.
4. Warning—do not park the machine on slopes; engage the
parking brake, lower the cutting decks, stop the engine and
remove the ignition key before leaving the machine
5. Warning—read the Operator's Manual before towing the
machine.
decal110-8924
1. Head lights
2. Engage
3. Power take-off (PTO)
4. Disengage
r:\decal110-8973
5. Fast
1. Read the Operator's
Manual.
2. Engine—start
10
125–8754
6. Slow
7. Lower the cutting units
8. Raise the cutting units
9. Read the Operator's
Manual.
120–4158
3. Engine—preheat
4. Engine—stop
decal125-8754
decal120-4158