Fluke 9132 User Manual page 35

9132 Portable IR Calibrator
User's Guide
Command Description
Set proportional band to n
Read heater power
(duty cycle)
Configuration Menu
Operating Parameters Menu
Read high limit
Set high limit
Serial Interface Menu
Read serial sample setting
Set serial sampling setting to n
seconds
Set serial duplex mode:
Set serial duplex mode to full
Set serial duplex mode to half
Set serial linefeed mode:
Set serial linefeed mode to on
Set serial linefeed mode to off
Calibration Menu
Read R0 calibration parameter
Set R0 calibration parameter to n r[0]=n
Read ALPHA calibration
parameter
Set ALPHA calibration parameter
to n
Read DELTA calibration
parameter
Set DELTA calibration parameter de[lta]=n
Functions not on menu
Read firmware version number
Read structure of all commands
Read all operating parameters
Legend:
Note:
34
Command Command
Format Example
pr[opband]=n pr=8.83
po[wer] po
hl hl
hl=n hl=90
sa[mple] sa
sa[mple]=n sa=0
du[plex]=f[ull]/h[alf]
du[plex]=f[ull] du=f
du[plex]=h[alf] du=h
lf[eed]=on/of[f]
lf[eed]=on lf=on
lf[eed]=of[f] lf=of
r[0] r
r=100.324
al[pha] al
al[pha]=n al=0.0038433
de[lta] de
de=1.3742
*ver[sion] *ver
h[elp] h
all all
[] Optional Command data
{} Returns either information
n Numeric data supplied by user
9 Numeric data returned to user
x Character data returned to user
When DUPLEX is set to FULL and a command is sent to READ, the command is returned followed by a
carriage return and linefeed. Then the value is returned as indicated in the RETURNED column.
Returned
Returned Example
po: 999.9 po: 1.0
hl:999 hl:126
sa: 9 sa: 1
r0: 999.999 r0: 100.578
al: 9.9999999 al: 0.0038573
de:9.99999 de: 1.507
ver.9999,9.99 ver.9103,2.00
list of commands
list of parameters
Acceptable
Values
Depends on
Configuration
0–126
0 to 999
FULL or HALF
ON or OFF
90 to 110
.002 to .005
0–3.0