Primary Connections; Optional Connections - Bosch DIVAR AN 3000 Quick Reference Manual

12 en | Quick install
Connections on back of DIVAR 5000 (4/8-channel)
Notice!
The 4-channel DIVAR 5000 models have a slightly different back panel (VIDEO IN/OUT
connectors 5 to 8 are disabled).
3.1.1

Primary connections

1.
2.
3.
For first time use, the NTSC or PAL selection is determined by the camera type connected to
VIDEO IN 1 in step 1. If no camera is connected to VIDEO IN 1 during first time use, the video
standard is default and can be set in the Startup Wizard.
3.1.2

Optional connections

1.
2.
3.
4.
5.
2013.11 | 1.1 | AM18-Q0668
ON
OFF
VIDEO IN
0
VIDEO OUT
1 Power ON/OFF switch
2 Camera VIDEO IN BNC connectors
3 CVBS output - Monitor A
4 Audio inputs
5 Audio output and MIC IN connector
6 Alarm outputs
7 Alarm inputs
8 RS485 and keyboard connectors
9 RJ45 ethernet connector
Connect the cameras to the VIDEO IN BNC connectors.
Connect monitor A to the VGA MON A output, or the HDMI MON A output, or the CVBS
MON A output.
Connect the USB mouse to a USB port (front or back panel).
Connect monitor B to the CVBS MON B connector.
Connect up to 4 audio signals to the AUDIO IN RCA (CINCH) inputs.
Connect 1 microphone to the MIC IN RCA (CINCH) output.
Connect 1 AUDIO OUT RCA (CINCH) output to the monitor or an audio amplifier.
Connect up to 16 ALARM IN inputs (via the supplied terminal blocks).
1 2 3 4 6 7
5
1 2 4 6 7
3 5
10 RS232 connector for Dome control
11 USB connector
12 e-SATA connector
13 HDMI output - Monitor A
14 VGA output - Monitor A
15 CVBS output - Monitor B
16 VIDEO OUT (loop through)
17 Power connector
Quick Reference Guide
DIVAR AN 3000 / DIVAR AN 5000
8 CVBS MON. A
AUDIO OUT
2 4
1 3
MIC IN
8 CVBS MON. B
AUDIO IN
VGA MON.A HDMI MON.A e-SATA
Bosch Security Systems
5 6 7 8
ALARM IN
+ _ + _
G G G G
ALARM OUT
RS-485 KEYBOARD
RS-232
ETHERNET