Bosch DIVAR AN 3000 Quick Reference Manual page 22

22 en | First time operation
–
Each channel view has one or more of the following icons displayed:
If multiple channels are displayed, you can double-click on a particular channel to show this
channel in full-screen (double-click on it again to return to multiple-channel view). The
currently selected channel is shown with a yellow border. From live mode, you can switch to
playback mode or access the main menu as described below.
Changing the display
1.
2.
Other functions in Live mode are:
–
–
–
Access to these functions requires the correct user level. Check with your administrator if you
do not have access.
Playback and Zoom
Move the mouse to the top centre of the video of the current channel; the system pops up the
playback and zoom interface. See following figure.
Figure 4.2: Playback and zoom
If your mouse stays inactive in this area for more than 6 seconds, the control bar automatically
disappears. See the following table for detailed information on the two preview control
buttons.
2013.11 | 1.1 | AM18-Q0668
To modify the channel ID, see display settings (Main Menu > Setting > Display).
Recording – this icon is
displayed when a channel is
recording
Motion detection – a
movement has been detected
in the camera view
PTZ active If your camera is
equipped with a PTZ function,
you can pan, tilt and zoom the
live viewing image as
described in the PTZ function.
Bring up the Quick menu.
Select View 1, 4, 8, 9 or 16 and choose the corresponding Camera configuration.
Playback and zoom
PTZ
Sequence
Quick Reference Guide
DIVAR AN 3000 / DIVAR AN 5000
Camera masking – the camera has been
blocked
No camera is attached to this channel or
communication has been lost from this
camera
Bosch Security Systems