Primary Connections; Optional Connections - Bosch DIVAR AN 5000 Operation Manual

DIVAR AN 3000 / DIVAR AN 5000
Connections on back of DIVAR AN 5000 (4/8-channel)
Notice!
The 4-channel DIVAR AN 5000 models have a slightly different back panel (VIDEO IN/OUT
connectors 5 to 8 are disabled).
4.1.1

Primary connections

1.
2.
3.
For first time use, the NTSC or PAL selection is determined by the camera type connected to
VIDEO IN 1 in step 1. If no camera is connected to VIDEO IN 1 during first time use, the video
standard is default and can be set in the Startup Wizard.
4.1.2

Optional connections

1.
2.
3.
4.
5.
Bosch Security Systems
ON
OFF
VIDEO IN
0
VIDEO OUT
1 Power ON/OFF switch
2 Camera VIDEO IN BNC connectors
3 CVBS output - Monitor A
4 Audio inputs
5 Audio output and MIC IN connector
6 Alarm outputs
7 Alarm inputs
8 RS485 and keyboard connectors
9 RJ45 ethernet connector
Connect the cameras to the VIDEO IN BNC connectors.
Connect monitor A to the VGA MON A output, or the HDMI MON A output, or the CVBS
MON A output.
Connect the USB mouse to a USB port (front or back panel).
Connect monitor B to the CVBS MON B connector.
Connect up to 4 audio signals to the AUDIO IN RCA (CINCH) inputs.
Connect 1 microphone to the MIC IN RCA (CINCH) output.
Connect 1 AUDIO OUT RCA (CINCH) output to the monitor or an audio amplifier.
Connect up to 16 ALARM IN inputs (via the supplied terminal blocks).
1 2 3 4 6 7
5
1 2 4 6 7
3 5
10 RS232 connector for Dome control
11 USB connector
12 e-SATA connector
13 HDMI output - Monitor A
14 VGA output - Monitor A
15 CVBS output - Monitor B
16 VIDEO OUT (loop through)
17 Power connector
Operations Manual
Quick install | en
8 CVBS MON. A
AUDIO OUT
2 4
1 3
MIC IN
8 CVBS MON. B
AUDIO IN
VGA MON.A HDMI MON.A e-SATA
2015.02 | 2.1 | AM18-Q0669
19
5 6 7 8
ALARM IN
+ _ + _
G G G G
ALARM OUT
RS-485 KEYBOARD
RS-232
ETHERNET