Powering Up - Bosch DIVAR AN 3000 Quick Reference Manual

DIVAR AN 3000 / DIVAR AN 5000
6.
7.
8.
9.
10. If required, connect a Bosch Intuikey keyboard cable to the KEYBOARD connector using
3.2

Powering up

For the DIVAR 3000:
1.
2.
3.
4.
For the DIVAR 5000:
1.
2.
3.
Bosch Security Systems
Connect up to 6 ALARM OUT outputs (via the supplied terminal blocks).
Connect a pan/tilt/zoom control unit to the RS-485 or RS-232 port.
Connect to your network via the ETHERNET connector.
Connect extra video out cables to the VIDEO OUT ports if loop through is required to
other devices (only for DIVAR 5000).
the supplied adaptor (only for DIVAR 5000).
Switch on all connected equipment.
Connect the supplied external power adaptor to the AC power outlet.
Connect the DC power cord to the 12 VDC connector on the unit.
Turn on the unit power ON/OFF switch on the rear of the unit.
Switch on all connected equipment.
Connect the power cable to the AC power outlet.
Turn on the unit power ON/OFF switch on the rear of the unit.
Quick Reference Guide
Quick install | en 13
2013.11 | 1.1 | AM18-Q0668