Advertisement
Video Recorder 600 Series
Quick install
To get the unit quickly operational, make the connections
described below and then enter the relevant data in the Quick
install menu. The Quick install menu appears the first time the
unit is started.
Connections
Primary connections
1.
Connect the cameras to the VIDEO IN BNC connectors
(automatically terminated).
2.
Connect monitor A to the VGA MON A output supporting
800x600 (4:3), 1024x768 (4:3), or 1280x1024 (5:4),
1366x768 (16:9) and 1440x900 (16:10).
3.
Connect USB mouse to a USB port.
Optional connections
1.
Connect monitor B to the VGA MON B connector
(supporting 800x600).
2.
Connect up to 4 audio signals to the AUDIO IN RCA
(CINCH) inputs.
3.
Connect 2 AUDIO OUT RCA (CINCH) outputs to the
monitor or an audio amplifier.
4.
Connect up to 8/16 ALARM IN inputs (via the supplied
terminal blocks).
5.
Connect up to 4 ALARM OUT outputs (via the supplied
terminal blocks).
6.
Connect a pan/tilt/zoom control unit to the RS-485 port
(via the supplied screw terminal block).
7.
Connect to your network via the Ethernet port.
8.
Connect a Bosch Intuikey keyboard cable to the
Keyboard-IN port if required.
Powering up
Switch on all connected equipment.
–
Connect the power unit to the AC power outlet.
–
Connect the DC power cord to the 12VDC connector on
the unit.
Bosch Security Systems
First-time use
The Quick install menu opens the first time the unit is used. Fill
in the basic settings in the three tabs to get the unit
operational. The unit begins recording automatically when the
Quick install menu is closed.
To open the Quick install menu at any other time:
1.
Press the menu
key to bring up the System Control
Bar.
2.
Press the menu
key again to enter the main menu.
–
The main menu appears on monitor A.
3.
Select System, then the Configuration submenu, and
finally Quick install.
Navigating
Use the supplied USB mouse. Alternatively, use the following
front panel keys:
–
Use the enter
key to select a submenu or item.
–
Use the arrow
move through a menu or list.
–
Use the exit
key to go back or to switch off the
menu.
After bootup, the unit presents the log in screen over a quad
display. The default User ID is ADMINISTRATOR, the default
password is 000000 (six zeros).
Quick install menu
The Quick install menu contains three tabs: International,
Continuous Recording, and Network. Click the Exit button to
exit the Quick install menu. Changing Quick install settings
overwrites customized settings.
International
Language
Select the language for the menu from the
list.
Time
Select a time zone from the list.
zone
Time
Select either a 12 or a 24 hour clock format.
format
Time
Fill in the current time.
Date
Select from three date formats which show
keys to
format
either the month (MM), the day (DD), or the
year (YYYY) first.
Date
Fill in the current date.
Continuous Recording
Set the Continuous Recording Resolution, Quality, Frame rate,
Covert, and Audio for each profile in the table.
Network
DVR name
Enter a unique DVR name to be used in
the network.
DHCP
Enable DHCP to have IP address, subnet
mask, and default gateway assigned
automatically by the network server.
The actual values are displayed.
IP address,
Fill in the IP, subnet mask, gateway
Subnet
addresses, and DNS server addresses
mask, and
when DHCP is not enabled.
Gateway
Quick install | en
3
F.01U.171.977 | v1.0 | 2010.9
Advertisement
