Table of Contents
Advertisement
DIVAR 3000/5000 Digital Video
Recorder
Connections on back of DIVAR 5000 (4/8-channel)
Notice!
The 4-channel DIVAR 5000 models have a slightly different back panel (video in/out
connectors 5 to 8 are covered).
4.1.1
Primary connections
1.
2.
3.
For first time use, the NTSC or PAL selection will be determined by the camera type (NTSC or
PAL) connected to VIDEO IN 1 in step 1. If no camera is connected to VIDEO IN 1 during first
time use, the video standard will be default and can be eventually set in the Startup Wizard.
4.1.2
Optional connections
1.
2.
3.
4.
5.
6.
7.
Bosch Security Systems
ON
OFF
VIDEO IN
0
VIDEO OUT
1 Power ON/OFF switch
2 Camera inputs
3 CVBS output - Monitor A
4 Audio inputs
5 Audio output and MIC IN connector
6 Alarm outputs
7 Alarm inputs
8 RS485 and keyboard connectors
9 RJ45 ethernet connector
Connect the cameras to the VIDEO IN BNC connectors.
Connect monitor A to the VGA MON A output, or the HDMI MON A output, or the CVBS
MON A output.
Connect the USB mouse to a USB port (front or back panel).
Connect monitor B to the CVBS MON B connector.
Connect up to 4 audio signals to the AUDIO IN RCA (CINCH) inputs.
Connect 1 microphone to the MIC IN RCA (CINCH) output.
Connect 1 AUDIO OUT RCA (CINCH) output to the monitor or an audio amplifier.
Connect up to 16 ALARM IN inputs (via the supplied terminal blocks).
Connect up to 6 ALARM OUT outputs (via the supplied terminal blocks).
Connect a pan/tilt/zoom control unit to the RS-485 or RS-232 port.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
10 RS232 connector for Dome control
11 USB connector
12 e-SATA connector
13 HDMI output - Monitor A
14 VGA output - Monitor A
15 CVBS output - Monitor B
16 Video out (loop through)
17 Power connector
Operator Manual
Quick install | en
CVBS MON. A
AUDIO OUT
2
4
ALARM OUT
1
3
MIC IN
CVBS MON. B
AUDIO IN
RS-232
VGA MON.A
HDMI MON.A
e-SATA
2013.05 | 1.0 | DIVAR 3000/5000 Digital Video
19
5 6 7 8
ALARM IN
+ _
+ _
G
G
G
G
RS-485
KEYBOARD
ETHERNET
Recorder
Advertisement
Table of Contents
