Quick Install; Connections; Primary Connections; Optional Connections - Bosch 600 Series Operation Manual

16 en | Quick install
3

Quick install

To get the unit quickly operational, make the connections described below and then enter the
relevant data in the Quick install menu. The Quick install menu appears the first time the unit
is started.
3.1

Connections

Figure 3.1 Back panel connections for 16-channel model
Figure 3.2 Back panel connections for 8-channel model
3.1.1

Primary connections

1.
2.
3.
3.1.2

Optional connections

1.
2.
3.
4.
5.
6.
7.
8.
3.1.3

Powering up

Switch on all connected equipment.
–
–
F.01U.169.663 | v1.0 | 2010.09
Connect the cameras to the VIDEO IN BNC connectors (automatically terminated).
Connect monitor A to the VGA MON A output supporting 800x600 (4:3), 1024x768 (4:3),
or 1280x1024 (5:4), 1366x768 (16:9) and 1440x900 (16:10).
Connect USB mouse to a USB port.
Connect monitor B to the VGA MON B connector (supporting 800x600).
Connect up to 4 audio signals to the AUDIO IN RCA (CINCH) inputs.
Connect 2 AUDIO OUT RCA (CINCH) outputs to the monitor or an audio amplifier.
Connect up to 8/16 ALARM IN inputs (via the supplied terminal blocks).
Connect up to 4 ALARM OUT outputs (via the supplied terminal blocks).
Connect a pan/tilt/zoom control unit to the RS-485 port (via the supplied screw terminal
block).
Connect to your network via the Ethernet port.
Connect a Bosch Intuikey keyboard cable to the Keyboard-IN port if required.
Connect the power unit to the AC power outlet.
Connect the DC power cord to the 12VDC connector on the unit.
Installation and Operation manual
Video Recorder 600 Series
Bosch Security Systems