Startup Wizard - Bosch DIVAR AN 3000 Quick Reference Manual

DIVAR AN 3000 / DIVAR AN 5000
3.4

Startup Wizard

The Startup Wizard opens automatically after you log in for the first time. See following
screen:
Figure 3.2: Startup wizard first screen
Select a language and video standard from the drop-down menus and click <Next step>. The
wizard will guide you through the following steps:
1.
2.
3.
4.
5.
6.
7.
8.
Use the following buttons to navigate through the wizard screens and assign your correct user
settings:
–
–
–
–
–
Bosch Security Systems
Choose to reset the startup wizard to run after the next system restart – see Reset startup
wizard, page 16.
Assign General settings – see General, page 16.
Assign Encoder settings – see Encoder, page 17.
Assign Schedule settings – see Schedule, page 18.
Assign Record settings – see Record, page 18.
Assign Network settings – see Network, page 19.
Finish the startup by clicking <Finished>.
Confirm the setup by clicking <OK>.
<Cancel> exit the Startup wizard and immediately access the DIVAR user interface (this
action will automatically install all factory defaults for the remaining Startup wizard
screens)
<Next Step> go to the next wizard screen.
<Previous step> return to the previous Startup wizard screen
<Default> assign the factory defaults for the current setup screen
<Copy> copy the current screen settings for a channel to other channels
Quick Reference Guide
Quick install | en 15
2013.11 | 1.1 | AM18-Q0668