Changing Switcher Settings; General Settings - Blackmagicdesign ATEM Installation And Operation Manual

Changing Switcher Settings

Clicking on the switcher settings 'gear' icon will open the settings window where you can
change general switcher settings, Multi View, label, HyperDeck and remote settings.
These settings are divided into tabs.

General Settings

Setting the Switcher Video Standard
The video setting is used to select the operating video standard of the ATEM switcher. For HD
model ATEM Television Studio switchers, this must be set to the same video standard as the
video sources you are plugging into the ATEM switcher. If they don't match, the inputs won't
appear correctly, and will most likely remain black. A good way to work out the video standard you
should use is to check your cameras, and then set the switcher video standard to the same format.
NOTE On ATEM Television Studio Pro 4K, all inputs will automatically convert any
HD or Ultra HD video format to match any HD or Ultra HD video standard set in the
switcher settings.
Changing switcher settings
Set video standard
Using ATEM Software Control 54