Deleting A Program File (Backup Delete); Formatting Memory (Format); Returning To The Factory Settings (Factory Reset) - Roland RD-2000 Parameter Manual

Deleting a Program File (Backup Delete)

Here's how to delete a previously saved Program file.
1
In the MENU screen, select
[ENTER] button.
cursor [ H ] [ I ] buttons
2
Use the
Delete," and then press the
3
Use the [DEC] [INC] buttons
select the Program file that you want to delete; then
press the [ENTER] button.
The confirmation message appears.
If you decide to cancel without deleting the Program file, press the
[EXIT] button.
MEMO
If you choose "ALL, " all Program files will be deleted.
4
Press the [MENU] button
NOTE
5 Be sure never to turn off the power while the delete is in
progress.
5 Do not disconnect the USB flash drive while the file is being
deleted.

Formatting Memory (Format)

"Formatting" is the operation of deleting all Program files from user
memory or initializing a USB flash drive so that it can be used with
the RD-2000.
USB flash drive cannot be used with the RD-2000 unless it is
formatted suitably for the RD-2000.
Before using a new USB flash drive, you'll need to format it.
NOTE
When you format the USB flash drive, all data previously
saved on that memory will be erased. Before you carry out a
format, make sure that the USB flash drive does not contain
important data you need to keep.
1
In the MENU screen, select
[ENTER] button.
cursor [ H ] [ I ] [ K ] [ J ] buttons
2
Press the
"Format USB Memory"
button.
A confirmation message appears.
If you decide to cancel the Format operation, press the
button.
"Utility" and press the
to select "Backup
[ENTER] button.
or the value dial to
to delete the Program file.
"Utility" and press the
to select
and then press the [ENTER]
[EXIT]
3
Carefully read the confirmation message in the
screen, and then press the
4
Press the [MENU] button
operation.
NOTE
5 Never turn off the unit while the screen indicates
5 Never turn off the power or disconnect the USB flash drive
while reading or writing is in progress.
Returning to the Factory Settings
(Factory Reset)
The settings stored in the RD-2000 can be returned to their factory
settings.
1
In the MENU screen, select
[ENTER] button.
cursor [ H ] [ I ] [ K ] [ J ] buttons
2
Press the
"Factory Reset" and then press the
A confirmation message appears.
3
Carefully read the confirmation message in the
screen, and then press the
4
Press the [MENU] button.
Factory reset is executed.
NOTE
Never turn off the power during Factory Reset (while
"Executing... Don't Power OFF"
5
Turn the power of the RD-2000 off, then on again.
Convenient Functions (Utility)
[ENTER] button.
to execute the Format
"Executing... "
"Utility" and press the
to select
[ENTER] button.
[ENTER] button.
appears in the display).
29