Initializing A Usb Flash Drive (Format Usb Memory) - Roland FP-E50 Reference Manual

Convenient Functions (Utility)
Exporting the Chord Pattern
(Export Chord Pattern)
You can export the chord pattern as a file.
1.
You can connect a USB flash drive here .
On the Utility screen, use the [ ä ] [ å ] buttons to select
2.
"Import/Export" and press the [Enter] button .
Use the [ ä ä ] [ å å ] buttons to select "Export Chord Pattern"
3.
and press the [Enter] button .
NOTE
If no user chord pattern exists on this instrument, "Initial Pattern" appears in
gray, and the data can't be exported.
Use the [ ä ä ] [ å å ] buttons to select the chord pattern to
4.
export, and press the [1] ([Piano])–[5] ([Other]) buttons
to select the appropriate check boxes .
5.
Press the [Enter] button .
A confirmation message appears.
If you decide to cancel, select "Cancel" and press the [Enter] button.
Use the [ ç ç ] [ æ æ ] buttons to select "OK", and then press
6.
the [Enter] button .
When export is finished, the message "Completed!" appears.
MEMO
The exported data is saved in the "ROLAND/CHORD_PTN/" subfolder on the
USB flash drive.
NOTE
Never turn off the power or disconnect the USB flash drive while the
"Executing..." display or a similar message is shown.
Initializing a USB Flash Drive
(Format USB Memory)
Here's how to initialize a USB flash drive.
1.
Connect the USB flash drive to the USB Memory port .
On the Utility screen, use the [ ä ä ] [ å å ] buttons to select
2.
"Format USB Memory" and press the [Enter] button .
A confirmation message appears.
If you decide to cancel, select "Cancel" and press the [Enter] button.
Use the [ ç ç ] [ æ æ ] buttons to select "OK", and then press
3.
the [Enter] button .
Once the initialization is finished, the message "Completed!" is shown and
the display returns to the Utility screen.
75 75