Introduction - Raven Cruizer II Operation Manual

Introduction

The Raven AccuBoom and AccuRow systems may be used with the Cruizer II
guidance console to provide automatic boom or planter section control
features.
Note: Prior to using the AccuBoom or AccuRow feature with the Cruizer II
console, the supporting machine specific hardware components must
be purchased and installed. Contact a local Raven dealer for more
information.
The AccuBoom feature automatically controls boom sections by referencing
the as-applied or coverage map displayed by Cruizer II. When AccuBoom
detects a section entering an area where product has previously been
applied, AccuBoom will automatically turn that section Off. When the section
leaves the previously applied area, AccuBoom automatically turns the section
back On. The AccuRow system provides the same functionality to
automatically shut off or turn on planter rows.
When the Cruizer II console detects the AccuBoom or AccuRow system on
the CANbus, the sprayer or planter shield will be displayed at the top of the
home screen.
Sprayer Shield
This document provides instructions for setting up and operating the
AccuBoom and AccuRow systems with the Cruizer II console. Refer to the
AccuBoom Setup section on page 3 or the AccuRow Setup section on page 6
for information on the system operating with the Cruizer II system.
Planter Shield
2