Field Review Mode; Modes Of Operation; Standard Mode - Raven Cruizer II Operation Manual

Field Review Mode

Zones or boundaries recorded with the AccuBoom or AccuRow features may
be displayed on the field review screen.
Field Boundary
Applied
Area
From the Cruizer II guidance screen, touch Menu
Field Review

Modes of Operation

When used with the Cruizer II console, the AccuBoom and AccuRow features
may be operated in one of the following modes:

• Standard Mode

• Zone Mapping Mode
Standard Mode
Standard operation of the AccuBoom or AccuRow system uses the coverage
map displayed on the Cruizer II Guidance screen to perform automatic
section control features. As sections cross into previously applied or covered
areas, the AccuBoom or AccuRow feature automatically turns that section
OFF. When the section returns to unapplied area, the system automatically
turns the section back ON.
This mode does not require zone or field boundaries The standard field
boundary Tools are used while operating in Standard AccuBoom Mode.
to switch to field review mode from the guidance display.
No Spray/
Plant Zone
Zone 1
and
1 0