Reference Of Mapping Icons - Raven Cruizer II Operation Manual

Reference of Mapping Icons

Touch the Boundary Mapping Menu icon in the lower, left corner of the
Guidance screen to display the available field, no spray, or no plant
boundary tools.
The icons in the following sections will be displayed within the Boundary
Mapping Menu. Some tools or features used with boundaries on the Cruizer II
console are only available while a boundary is recorded or after recording of a
feature boundary is completed.
Field Boundary
Use the Record Field Boundary icon to begin recording a field boundary.
Note: The AccuBoom and AccuRow features will
Touch the Pause icon to temporarily interrupt recording of the field
boundary. To resume recording the boundary, select the record field
boundary icon from the boundary mapping menu.
Select the Stop icon to close the boundary. Cruizer II will draw a straight
line between the current vehicle location and the boundary starting point to
close the boundary.
Select the Reset Field Boundary icon to clear the completed field
boundary from the current guidance session.
Touch the Field Boundary Tools icon to display the Set Marker Location
screen. Select the desired point on the boom or implement to track as the
boundary location.
AccuBoom
Use the Record No Spray icon to begin recording a no spray zone
boundary.
Touch the Pause button to temporarily interrupt recording of the no spray
zone. To resume recording the boundary, select the record no spray zone
boundary icon from the boundary mapping menu.
Select the Stop icon to close the boundary. Cruizer II will draw a straight
line between the current vehicle location and the boundary starting point to
close the boundary.
1 3
automatically create no spray/plant zones outside of a
completed field boundary.