Sprayer Setup - Raven Cruizer II Operation Manual

Sprayer Setup

From the home screen, touch
Tools, and select the Sprayer icon
in the Vehicle menu to access the
Sprayer Screen.
This screen allows the operator to
customize the response of the
AccuBoom system for the specific
flow control hardware installed on
the sprayer.
Note: Touch the Home icon at any
time to return to the home
screen.
Look Ahead
AccuBoom monitors the GPS position and as-applied map while considering
the look ahead times to begin turning sections on or off before they cross
spray or no spray boundaries. Look ahead times may be used to compensate
for delays in the sprayer system including the time it takes for boom or control
valves to open or close. The specific look ahead time is a function of the valve
timing and the speed at which the operator is driving the machine.
Percent Coverage
AccuBoom automatic section control allows the operator to define the amount
of coverage tolerated during an application. For applications which will require
complete coverage, the percent coverage setting should be set to 100
percent. When applying products that do not tolerate overlaps, the percent
coverage should be set to a lower value. AccuBoom allows a percent
coverage value anywhere from 5 to 100 percent.
AccuBoom Override
The AccuBoom override allows the operator to momentarily override the
automatic section control feature and force all boom sections on. This may be
useful to re-apply product to a heavily infested area in a field or when
accelerating from a complete stop. Enable the AccuBoom override feature
and allow the boom valves to open and tips to develop a proper spray pattern
before driving ahead. The amount of time for the override may be modified to
match specific application needs. The AccuBoom override icon is located on
the lower left side of the Guidance screen.
4