Zone Mapping Mode; Field Boundaries; Recording A Zone Boundary - Raven Cruizer II Operation Manual

Accuboom or accurow for cruizer ii consoles

Hide thumbs Also See for Cruizer II:

Table of Contents

Zone Mapping Mode

AccuBoom or AccuRow zones may be created around areas inside which

product application should be avoided. Areas such as waterways, well heads,

tree lines, etc may be marked as no spray zones for automatic section shutoff

features.

With a no spray/plant boundary completed, the AccuBoom or AccuRow

systems will automatically turn off any section that cross into the no

application area without requiring the operator to toggle switches on or off.

When the section crosses out of the area, the system toggles the section back

on.

When a field boundary is created within an AccuBoom or AccuRow enabled

guidance session, the system will automatically create a no spray/plant zone

outside of the completed field boundary. A minimum of three boom or

implement widths outside of the completed field boundary will be assigned to

a no spray/plant zone.

Note: When creating a field boundary, the Cruizer II does not display the field

boundary while driving and the completed boundary only appears in

the Field Review Screen.

Note: If a field boundary is recorded with the AccuBoom or AccuRow feature

enabled, Cruizer II will automatically create a no spray/plant zone of at

least three guidance widths outside of the finished field boundary.

The following procedure illustrates the process to record an AccuBoom no

spray zone.

1. To begin recording the boundary, touch Boundary Mapping Menu and

then Record No Spray Zone.

1 1

Table of Contents