Using The Pouring Shield; Operating The Speed Control - KitchenAid 5K45SS User Manual

USING THE STAND MIXER

USING THE POURING SHIELD*

Use the pouring shield to avoid having ingredients splashing out of the bowl when
mixing, as well as to easily pour ingredients in the bowl while mixing.
For best results, rotate the shield
so the motor head covers the
U-shaped gap in the shield. The
1
pouring chute will be just to the
right of the attachment hub as
you face the Stand Mixer.

OPERATING THE SPEED CONTROL

NOTE: The Stand Mixer may warm up during use. Under heavy loads with extended
mixing time, the top of the unit may become hot. This is normal.
Plug Stand Mixer in proper electrical
outlet. Always set speed control
lever on lowest speed to start, then
1
gradually increase speed to avoid
splashing ingredients. See "Speed
control guide" chart.
* Included with select models only. Also available as optional accessory.
W10863290A_01_EN_v06.indd 17
Pour the ingredients into the bowl
2
through the pouring chute.
Do not scrape bowl while Stand Mixer
is operating. The bowl and beater are
designed to provide thorough mixing
2
without frequent scraping. Scraping
the bowl once or twice during mixing
is usually sufficient.
USING THE STAND MIXER | 17
3/30/16 11:18 AM