Table of Contents
Advertisement
GENERAL LOCATION INFORMATION
•
When positioning the heater, the main variables governing the
location are Flueing and Warm Air Distribution.
•
This heater must not be installed where curtains or other combustible
materials could come into contact with it. In some cases curtains may
need restraining. Refer to page 5 and page 6 for additional safety
consideration.
•
Mantles and surrounds can be added to compliment the design
provided that they conform to the clearances shown in the diagrams
below.
•
The minimum clearance from the edge of the appliance is 400 mm.
The depth of the mantle/surrounds at the minimum clearance may
not exceed 150 mm.
•
An additional 100 mm of clearance is required for every extra 50 mm
of mantle depth, i.e. for a 200 mm deep mantle the clearance is 500
mm (as shown below).
•
Ensure that the area in which the appliance is installed has adequate
fixed ventilation, this fixed ventilation must be provided as detailed in
AS/NZS 5601.1.
Combustion product spillage testing must be conducted
during appliance commissioning. This testing may show a
NOTE
need for additional fixed ventilation.
The glass dress guard supplied with this appliance must not
be permanently removed as it fulfils an operational safety
function. Additional dress guards including free standing
types may be used in conjunction with, but not replace the
dress guard supplied with this appliance.
TV AND ORNAMENTATION WARNING
INSTALLATION OF TV OR ORNAMENTATION ABOVE THE
HEATER
CAUTION
The installation of electrical appliances above and in the
vicinity of the heater such as, but not limited to, Plasma TV,
LCD TV, Home Theatre Screens, Speakers, etc must comply
with their manufacturers' instructions.
It is the responsibility of the installer/end-user to check the
manufacturers installation instructions of these items and
to ensure the location or recess is suitable.
This caution also extends to, but is not limited to,
ornaments such as: Paintings, Prints, Photographs,
Tapestries, Mirrors, Stuffed Animals, etc.
Please note the recommended clearances as per the
diagram above. The temperature of the wall surface directly
above the appliance may be elevated and may discolour
paint finishes or distort vinyl wall coverings. For durability
of surfaces you should contact the relevant manufacturer
for their specification.
Use either a shelf or mantle below the TV or ornament or
alternately you can construct a recess to mount TV or
IDEA
ornament in.
Rinnai does not take any responsibility for any damage
occurring to any items installed above and in the vicinity of
NOTE
this appliance.
Rinnai
HEATER LOCATION
21
INBUILT MODELS
Maximum mantle depth (at
Maximum mantle depth (at
400mm) may only be 150mm
400mm) may only be 150mm
m m
0 0
1 0
FREE-STANDING MODELS
m m
0 0
1 0
75mm
SAPPHIRE RIB2312 OIM
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
