Table of Contents
Advertisement
channel, and
disappears when the preset time is up. If there
is no temporary identification, the main channel pointed by
transmits when you press PTT (you can also set the active
channel to transmit)
Note: As the dual waiting mode is in main channel and sub
channel scanning states, DTMF, auto scan, individual operation
and ARTS auxiliary function do not work.
Keypad Lock & Unlock
If the keypad isn't needed, you can lock into prevent misuse. You
can lock or unlock the keypad in the following ways:
● Shortcut
Press and hold the [#] button to lock or unlock the keypad.
● Menu selection
Enter "Menu -> Settings ->Radio Settings -> Keypad Lock",
select "Manual" or "5 sec (or 10 sec, or 15 sec)"to lock it
automatically.
»Manual: Press and hold the [#] button to manually lock or
unlock the keypad.
»5 sec /10 sec /15 sec: If there is no radio operation in the
auto-lock time, the keypad will automatically lock.
Note: The default keypad lock range is all buttons on the panel,
excluding the side buttons SK1, SK2 and PTT.
Call
Call icon
The following icons displayed on the LCD appear in the contact
list or call log to indicate the ID type.
Single call: In the contact list, it indicates the signed user alias
(name) or ID (number).
Group call: In the contact list, it indicates the group alias
(name) or ID (number).
All call: In the contact list, it indicates the group alias (name)
or ID (number).
Please keep the microphone about 2.5~5 cm from the mouth in
order to ensure the best reception volume of the receiver's
two-way radio.
Single call
Single call is a call from an individual two-way radio to another.
Initiate a Call
You can initiate a single call in the following ways. When the
single call starts, the LCD screen displays
shows Single Call, the second line shows the contact alias, and
the third line shows the single call number and the call icon
Initiate a Call by Channel Switching
In the standby interface, press [VFO/MR] to switch to channel
mode, use the [
] / [
] buttons to select the channel, press and
hold the [PTT] button to initiate single call.
单呼
: The first line
Contact 1
1
.
Hide quick links:
Advertisement
Table of Contents
