Advertisement
Table of Contents
User's Instruction
υ
Please read this manual carefully before use.
υ
Do not operate or charge the transceiver in an inflammable, explosive and banned area (gas station,
hospital, airport, etc.).
υ
Do not transmit the transceiver in the government administrated area without permission.
υ
Do not expose it in the direct radiate sun for a long time, or put it nearby the heater
υ
Do not put it in the extreme dusty, wet or splashed places, or on the unsteady surface.
υ
If find the peculiar smell or mist giving off from the transceiver, cut off the power supply at once and
remove the battery, then contact our company or local distributor.
υ
Maintenance can only be undertook by professional technicians
Content
Supplied Accessories
Preparation 02
Sketch Map
Basic Operation 06
Technical Specification 15
文件使用
PDF
" pdf Fact or y Pr o"
1
试用版本创建
www. f i nepr i nt . cn
Advertisement
Table of Contents
Related Manuals for Baofeng UV-6
Summary of Contents for Baofeng UV-6
-
Page 1: Table Of Contents
User’s Instruction υ Please read this manual carefully before use. υ Do not operate or charge the transceiver in an inflammable, explosive and banned area (gas station, hospital, airport, etc.). υ Do not transmit the transceiver in the government administrated area without permission. υ... -
Page 2: Unpacking And Checking Equipments
Unpacking and Checking Equipments Carefully unpack the transceiver. We recommend that you identify the items listed in the following before discarding the packing material. If any items are missing or have been damaged during shipment, please contact the deliveryman or your dealers immediately. Item Antenna Hand Strap... -
Page 3: Installing The Battery Pack
Installing the Battery Pack Make the battery aim at the slide way of transceiver back, then push forward the battery till the release latch is on the base of transceiver lock. (Picture 1) To remove the battery pack, press the release latch and slide the battery away from the transceiver. (Picture 2) Picture 1 Picture 2... -
Page 4: Getting Acquainted
Getting Acquainted A. State Indicator: the green light keeps lighting while receiving a selected signal. The red light twinkles while receiving designated signal. Red light twinkles while the transmitting is to be time out , green light twinkles while scanning. B. -
Page 5: Auxiliary Functions
Auxiliary Functions Working Channel Number 128 128 channels into eight groups and 16 channels for each group. Channels 1-16 group Channel 65-80 group Channels 17-32 group Channels 81-96 group Channels 33-48 group Channels 97-112 group Channels 49-64 group Channels 113-128 group Channel selector can only select the channel in the current group. - Page 6 Channel Copy (Cable Copy) Press and hold 【MONI】button to copy the channel parameters into another transceiver. Before copying, connect the two transceivers by a copy cable. During the copy, red light of the copying part continuously twinkles; green light of copied part continuously twinkles. Copying completed, indicator lights go out.
- Page 7 Scanning The transceiver can scan group channel or full channels. The green LED twinkles rapidly while scanning. Press and hold 【MONI】,【PF1】button simultaneously to start scanning group channel or full channels Rotate the channel selector at “No.1”, after scanning; scanning channel No. is 1-16. Rotate the channel selector at “No.2”, after scanning;...
- Page 8 Release [PTT ] button to transmit EOT. Press and release [PTT ] button to transmit BOTH. DTMF ST(must be set by PC programming software) DT-ST ANI-ST DT+ANI Unity Section: Frequency Range: 136.00-174.00 MHz 400.00- 480.00MHz Storage Channel Step Frequency 2.5/5/6.25/10/12.5/20/25KHz Rated voltage DC 7.4V (Chargeable Li-ion Battery) H-1800 m Ah （Li-ion Battery）...
- Page 9 Busy Channel Lockout Switch on or off each effective channel busy lockout function via PC programming software. When the setting is ON, signal from the current channel is banned to transmit. Battery Voltage Detection a. Voltage too high: when high voltage transmission is banned. If the voltage is too high, it is ineffective to press [PTT ] key, transmit VOX or send Emergency Alarm, meanwhile the prompt sound “Beep”...
- Page 10 D356I，D364I，D365I，D371I，D411I，D412I，D413I，D423I，D431I，D432I，D445I，D446I， D452I，D454I，D455I，D462I，D464I，D465I，D466I，D503I，D506I，D516I，D523I，D526I， D532I，D546I，D565I，D606I，D612I，D624I，D627I，D631I，D632I，D645I，D654I，D662I， D664I，D703I，D712I，D723I，D731I，D732I，D734I，D743I，D754I 文件使用 试用版本创建 " pdf Fact or y Pr o" www. f i nepr i nt . cn...