Sub-Audio Scan; High/Low Power Adjustment; Offline; Squelch Level Adjustment - Baofeng DM-5R User Manual

up to 16 channels, either digital or analog. You can set the scan
list as follows by using this product.
Menu path: Scan -> Scan list.
● Add channel
Add a new channel to the current scan list.
● Set priority channel
You can set the currently selected channel as a priority channel
or a non-priority channel. If you want to focus on activities on a
channel, set it as a priority channel. The sweep frequency of the
priority channel is higher than that of non-priority channel. You
can set up to two priority channels in each scan list, expressed
apriority channel 1 and priority channel 2.
● Delete channel
Delete a channel in the current scan list, but you can't delete the
first channel in the list.

Sub-audio Scan

This product supports sub-audio scanning function. Operation
path: In analog mode, press the [MENU] button -> Settings
->Radio Settings ->Sub-audio Codec or Sub-audio Decoding
->press the [*] button to enablesub-audioscan insub-audiosetting
mode
Note: Enable CTCSS scanning in CTCSS mode, and enabled
scanning in DCS mode.

High/Low Power Adjustment

This feature enables fast switching of high and low power. When
the communication distance meets your needs, you can select
low power to save power. Please select high power flow power
does not allow you to communicate with other two-way radios
farther away.
Press the [#]button to switch the transmission power of the
current channel between high and low.
Note: The power level of each channel needs to be set
separately.

Offline

In case of a turntable failure or beyond the coverage of the
turntable, but the two terminals are in the communication range
of the other party, you can press [Offline] shortcut to switch to
direct mode to achieve direct call of two terminals. Press the
[Offline] shortcut to turn on the offline function (rising alert tone);
press the button again to turn off this function.
Monitor
Turn on the "Monitor" function to adjust the signal reception
match condition.
● Press and hold the [Monitor] shortcut to turn on this feature,
and the LCD shows icon

Squelch Level Adjustment

You can adjust the signal strength required to receive the signal
; release the button to exit.