Alarm Call (Emergency Alarm And Call); Initiate An Emergency Alarm; Receive Emergency Alarm; Exit Alarm Call - Baofeng DM-5R User Manual

transmissions, the number of non-courtesy transmissions, the
number of emergency calls, the time of each transmission, and
the transmission interval) of the current channel, and the contact
of the reply channel of the emergency alarm system is group call.
Emergency Alarm

Initiate an Emergency Alarm

Press and hold the "Side button 1 (Call)" to enter the alarm
mode; the red LED flashes, local and wireless alarm commands
are sent. LCD interface displays
Emergency Alarm, the second line shows the alarm group call
contact alias, and the third line shows the group call number.
Exit Emergency Alarm
Alarm initiator can exit the alarm mode in the following ways:
● Press the [Call] button again.
● Press the [PTT] button.
● Turn off the unit.
● After the number of alarm cycles has been used, the radio will
automatically exit the emergency alarm mode.

Receive Emergency Alarm

The alarm information is displayed after receiving the alarm
command, and LCD interface displays : The first line shows
Receive Alarm, the second line shows Group Call, the third line
shows the alarm alias or ID and sends local alarm; press the
[PTT] button to exit.
紧急报警
: The first line shows
组呼
Contact 1
Note: The alarm system works only when the dealer has
configured the "emergency alarm system" of the current channel,
and the contact of the reply channel of the emergency alarm
system is group call.

Alarm Call (Emergency Alarm and Call)

Initiate an Alarm Call
1.Press and hold the "Side button 1 (Call)" to enter the alarm
mode; the red LED flashes, local and wireless alarm commands
are sent. LCD interface displays
Emergency Alarm, the second line shows the alarm group call
contact alias, and the third line shows the group call number.
2. Press and hold the [PTT] button to turn on the red LED, and
speak to the microphone to send an emergency call.
Note: If you need to start an emergency call again when the
number of emergency calls is used up, press and hold the [PTT]
button.

Exit Alarm Call

Alarm initiator can exit the alarm mode in the following ways:
● Press the [Call] button again.
● Turn off the unit.
● After the number of alarm cycles has been used, the radio will
automatically exit the emergency alarm mode.
Receive Alarm Call
紧急报警
: The first line shows
Contact 1
1