Baofeng DM-5R User Manual page 17

Level 1 men Level 2 menu
Settings Radio settings
Level 3 menu Options
Language English
selection
Chinese
ON
DTMF caller ID
OFF
OFF
DTMF side tone
ON
Time scan
Scan recovery
Carrier scan
mode
Search scan
None
Online code
PTT online/offline
code
Offline code
Online /offline code
100~1000ms
Delay in sending code
Selecting dual Main channel
waiting Reception channel
Description of settings
English version, including menu, call tips, call logs and all
other interfaces
Simplified Chinese
When DTMF caller ID is turned on, the caller ID is displayed
when there is incoming call; calling format: caller ID separator
own ID
OFF
When DTMF codeword is sent, the unit does not make sound
When DTMF code word is sent, the unit makes the sound
Time mode scan; continue scanning in5 seconds after signal
is searched
Carrier mode scan; wait for 5 seconds after the carrier
disappears before continuing scanning when signal is
searched
Search mode scan; stop scanning when signal is searched
Do not send code when PTT is pressed
Press PTT to send code; online code word is set by the host
computer
Release PTT to send code; offline code word is set by the
host computer
Send code when it is pressed or released
The delay time before automatic transmission
Press PTT in dual waiting state, the transmission frequency
band depends on the frequency band pointed by the cursor of
current band
Remark
For analog
mode only