Baofeng DM-5R User Manual page 19

Level 1 men Level 2 menu
Settings Radio settings
Level 3 menu Options
1~10
Relay tail tone
delay
Input 001~128
Channel storage
Input 001~128
Channel deletion
12345678
Own number
Model info
S/N
CPS version
Hardware version
Device info
Firmware version
DSP version
Programming time
Description of settings
Step: 1 (200ms) When the signal is transmitted across the
relay station and retransmitted by it, in order to confirm
whether the relay station has retransmitted the signal for this
two-way radio, the delay time of the relay station stopping
transmitting shall be utilized to confirm that the signal has
been retransmitted. The menu item is used to adjust the time
of the noise. If the noise isn't needed, please set it as OFF
To save a channel, manually enter the channel number to be
saved. If the input channel has a parameter, the word "CH"
appears at the top right of the screen. When the range is
exceeded, it prompts "channel number incorrect"
To delete a channel, manually enter the channel number to be
deleted. If the input channel has a parameter, the word "CH"
appears at the top right of the screen. When the range is
exceeded, it prompts "channel number incorrect"
Digital mode displays the digital ID of the unit, up to
16777214; analog mode displays the DTMF ID of the unit, up
to99999999; this option is read only
The machine model
Unique alphanumeric character of the two-way radio
Reading and writing frequency software version
Hardware circuit board version
The software version of the internal hardware components of
the two-way radio
DSP software version number of digital processing chip
The date and time of the last programming of the two-way radio
Remark
For analog
mode only
For digital
mode only