Table of Contents
Advertisement
by adjusting the noise level. In general, the higher the squelch
level, the higher the required signal strength is. If it is set to
"Normally on", the speaker will directly turn on to play the
background sound, regardless of whether the decoding
conditions are met.
Push-to-call
You can ask the dealer to set [Push-to-call] shortcut, and press
the shortcut to initiate the corresponding operation. Specific
operation categories are as follows:
Business on digital channels:
» For group call contacts, you can initiate a group call or send
text message.
» For single call contacts, you can initiate single call, send text
message, and initiate extended function. Extended functions
include: call prompt, radio detection, remote monitor, activation,
and remote inhibit.
Call prompt
In digital mode, you can send call prompt to a contact, and the
other party can call back directly
● Initiate call prompt:
Select single call contact (enter "Menu -> Contacts ->Press [
/[
] to select single call contact ->Call prompt"), or press the *
button in the main interface to enter single call number, select
"Call prompt", and press the[MENU] button to start;"Call prompts
successful" displays if it is successful, and "Call prompt failed"
displays if fails.
● Receive call prompt:
After receiving the call prompt command, a tone rings (tone
function is enabled for the caller's contact in the contact list) and
stays in the display interface. Press [EXIT] to exit.
Radio detection
In digital mode, you can initiate radio detection to a contact
without interfering with each other to confirm whether the other
party has turned on the unit or uses in the current channel.
● Initiate radio detection:
Select single call contact (enter "Menu -> Contacts -> Press [ ]
/[
] to select single call contact ->Radio detection"), or press the
* button in the main interface to enter single call number, select
"Radio detection", and press the [MENU] button to start; "Radio
detection is successful" displays if it is successful, and "Radio
detection failed" displays if fails. When the radio detection is
successful, press PTT to call the other party.
● Receive radio detection:
Reply automatically after receiving radio detection command.
Remote monitoring
In digital mode, you can remotely activate the microphone of a
]
contact, and monitor the voice and background sound of the
other party.
● Initiate remote monitor:
Select single call contact (enter "Menu -> Contacts -> Press [
/[
] to select single call contact ->Remote monitor"), or press the
]
Hide quick links:
Advertisement
Table of Contents
