Baofeng DM-5R User Manual page 41

Chinese
Language selection
OFF
Caller ID
ON
OFF
DTMF side
tone
ON
Time scan
Scan
Carrier scan
recovery
mode
Search scan
None
Online code
PTT
online/offline
Offline code
code
Online /offline
code
Delay in
100~1000ms
sending code
Selecting
Main channel
dual waiting
Simplified Chinese
OFF
When caller ID is turned on, the caller ID is
displayed when there is incoming call;
calling format: caller ID separator own ID
When DTMF code word is sent, the unit
does not make sound
When DTMF code word is sent, the unit
makes the sound
Time mode scan; continue scanning in5
seconds after signal is searched
Carrier mode scan; wait for 5 seconds after
the carrier disappears before continuing
scanning when signal is searched
Search mode scan; stop scanning when
signal is searched
Do not send code when PTT is pressed
Press PTT to send code; online code word
is set by the host computer
Release PTT to send code; offline code
word is set by the host computer
Send code when it is pressed or released
The delay time before automatic transmission
Press PTT in dual waiting state, the
transmission frequency band depends on
the frequency band pointed by the cursor of
current band
Reception
Selecting
channel
dual waiting
Frequency
Signaling tail
120°
tone
elimination
180°
240°
OFF
Non-signalin
g tail tone
Frequency
elimination
OFF
Across-relay
1~10
tail tone
elimination
Press PTT in dual waiting state, the
transmission frequency band depends on
the effective reception frequency band; in
non-receiving state, press PTT to transmit
in main channel frequency band
Analog with sub-audio signaling, release
PTT to send sub-audio tail tone elimination
signaling
Analog with sub-audio signaling, release
PTT to send 120° phase sub-audio signaling
Analog with sub-audio signaling, release
PTT to send 180° phase sub-audio signaling
Analog with sub-audio signaling, release
PTT to send 240° phase sub-audio signaling
Turn off tail tone elimination
Analog without sub-audio signaling, release
PTT to send sub-audio tail tone elimination
signaling
OFF
Step: 1 (500ms) When transmitting across
the relay and retransmitting, after the
transmitter releases the PTT key, the
two-way radio enters receiving state. Due
to the delay of relay, the instant signal
transmitted by the relay can be received.
The value of the menu item shall be
adjusted to ensure that no noise of this
two-way radio is generated
transmitting across the relay, so as to
confirm whether the relay is operating. The
menu item shall be set OFF.
when