Introduction - Fluke 3130 User Manual

Introduction

The Fluke 3130 (the Product) is a portable pressure calibrator that can use two methods
to source pressure:
•
An internal, electronic pump that has a range of -12 psi to 300 psi (-0.8 bar to 20 bar)
•
An external connection that lets you use externally-sourced, clean, dry air to regulate
pressures to a maximum of 300 psi
Product features include:
•
A built-in needle valve for metering in pressure
•
Variable volume for small pressure changes
•
An internal pressure sensor
•
Measurement of 0 V dc to 30 V dc and 0 mA to 24 mA from a unit under test (UUT).
•
Sourcing current of 0 mA to 24 mA to a UUT also available
•
A 24 V dc loop power supply that uses dedicated front panel jacks. For voltage
transmitters, a dedicated 24 V dc loop power supply is available in volts measure
mode. mA loop power is supplied from the left-most jacks.
•
An internal, high-capacity NiMH battery
•
A universal power supply (90 V ac to 250 V ac) that can charge the battery pack
while it powers the Product
•
Pressure measurement with the internal pressure sensor or with a Fluke 700 Series
external pressure module
•
The Product can show pressure units in these different values:
•
psi
•
MPa
•
kPa
•
inHg 0°C
•
mmHg 0°C
• 2
kg/cm
•
mmH O 4°C
2
•
mH2O20°C
•
inH O 4°C
2
•
inH O 60°C
2
•
cmH O 4°C
2
•
cmH O 20°C
2
•
bar
•
mbar
1