Table of Contents
Advertisement
Display
The display can be made up of a maximum of three process measurement sections plus the
menu bar which is always at the bottom of the display. The sections of the display are
referred to by the Product and in this manual as UPPER, MIDDLE, LOWER, and menu bar.
Push the softkeys that correspond to items shown on the menu bar to move through the
Product menus. The arrow keys change values for some menu steps. See "Product Menus".
The Display sections are shown in Figure 2.
3
4
5
1
Item
Menu Bar- Access the Product menus and parameters from the menu bar. See the "Product
Menus" section.
Active Display- On the main menu, the middle of the menu bar shows the active display. In
this image, the LOWER display is active. This section of the menu bar can also say UPPER
and MIDDLE. This depends on which section is active.
UPPER display section
MIDDLE display section
LOWER display section
Pressure Units- Pressure units are shown in this section of the display. Select from 14
pressure units.
Span Indicator- Percentage of the 4 mA to 20 mA span when the mA or mA loop functions
that are used show in this section of the display.
Primary Parameter- Shows the current measured parameter.
2
Description
Figure 2. Display
Portable Pressure Calibrator
Features
6
7
8
hbb008.eps
5
Hide quick links:
Advertisement
Table of Contents
