Options Menu; Configuration Menu 2 - Ametek 7270 Instruction Manual

Chapter 5, FRONT PANEL OPERATION

5.3.21 Options Menu

5.3.22 Configuration Menu 2

5-36
CLEAR SCREEN
The input and output displays scroll once they are full so that they always display the
most recent characters received and sent. Pressing the Clear Screen key clears both
areas.
Pressing the Previous Menu key returns control to either the Communications menu
or the USB Status menu, or the RS232 Setting menu, depending on how the
Communications Monitor display was accessed.
Pressing the Previous Menu key returns control to the Configuration Menu.
When the Configuration menu is displayed, pressing the Options key accesses the
Options Menu, shown in figure 5-27.
The options menu is used to install additional firmware options and shows which
options are already fitted (note that currently there are no options available, but the
screen is provided to allow for future developments). If an option is purchased at the
same time as the instrument, then the factory will install it and no further action is
required. If however it is bought at a later date then the user will need to provide
details of the instrument's serial number with his order. In return, he will be given a
certificate with a unique eight-digit Option Key number that can be used to enable
the option on the instrument.
The controls on the Options Menu operate as follows.
INSTALL OPTION
Pressing this key displays the keypad icon. Enter the Option Key number you have
been given using the numerical keypad, and press the
symbol next to the option being installed in the list of available options on the right
hand side of the screen will change to a  to indicate successful installation.
Pressing the Previous Menu key returns control to the Configuration Menu.
When the Configuration Menu 1 is displayed, pressing the Configuration 2 key
accesses the Configuration Menu 2, shown in figure 5-28.
Figure 5-27, Options Menu
to enter the number. The 