Ametek 7270 Instruction Manual page 191

The Auto-Default function on the front-panel Auto Functions menu and the ADF 0
computer command set the model 7270's controls and output displays as above, and
in addition sets the communications interface parameters as follows:-
RS232 Settings
Baud rate
Data bits
Delimiter
Address
Character echo
Parity
Prompt character
Ethernet Settings
IP Address Assignment
IP Address
Subnet Mask
Default Gateway
Computer IP Address
USB Settings
Terminator
The ADF 2 computer command sets the model 7270's controls and output displays as
for the ADF 0 command, except that the oscillator amplitude is set to 0 V rms.
Appendix D, DEFAULT SETTINGS
19,200
7 + 1 Parity
, (044)
1
On
Even
On
Manual
000.000.000.000
000.000.000.000
000.000.000.000
000.000.000.000
Null, Status & Overload bytes
D-3