Modifying Module Alarm Limits Using Lci; To Modify Alarm Limits Using Lci - Cisco Prisma II Installation Manual

Chapter 4 Operation using LCI

Modifying Module Alarm Limits using LCI

To Modify Alarm Limits using LCI

Using LCI, you can modify alarm limits for parameters that allow for such changes.
1 In the module tree, right-click the module, and then click Details.
The Module Details window appears as shown in the following example. The
alarm limits are shown under Parameters.
2 Double-click the limit you want to change. This example shows a Change Value
dialog box for the Optical Input 1 Minor Low Limit parameter.
128