Cisco Prisma II Installation Manual page 25

Overview
This chapter describes the Cisco
Return (QEDR) Receiver Module.
Note: This product uses the FreeRTOS real time operating system (v
8.2.1). The source code can be obtained from
http://www.FreeRTOS.org.
FreeRTOS is a free software; it can be redistributed and/or modified
under the terms of the GNU General Public License (version 2) as
published by the Free Software Foundation and modified by the
FreeRTOS exception which allows distribution of a combined work
that includes FreeRTOS, without being obligated to provide the source
code for proprietary components outside of the FreeRTOS kernel.
Purpose
This guide provides information about the receiver. This chapter
describes the front and back panels, and presents a setup summary for
the receiver.
Who Should Use This Document
This document is intended for authorized service personnel who have
experience working with similar equipment. The service personnel
should have appropriate background and knowledge to complete the
procedures described in this document.
Qualified Personnel
Only appropriately qualified and skilled personnel should attempt to
install, operate, maintain, and service this product.
WARNING:
Only appropriately qualified and skilled personnel should attempt
to install, operate, maintain, and service this product. Otherwise,
personal injury or equipment damage may occur.
Prisma II Quad Enhanced Digital
® ®
23