To Set Adjustable Alarm Thresholds Using The Icim - Cisco Prisma II Installation Manual

Chapter 3 Operation using ICIM

To Set Adjustable Alarm Thresholds using the ICIM

You can use the ICIM to change the adjustable alarm thresholds of this module from
their factory default values.
1 At the MODULE menu, press the
ICIM LCD.
2 Press the
label n/a is displayed, you cannot configure that alarm threshold. Press the
key to highlight the alarm threshold for the next parameter.
3 When the threshold that you wish to set is highlighted, press the
4 Press the
5 Press the
Note: Press the Cancel (
6 Press the
the ICIM LCD.
7 When finished, press the
102
key. The alarm thresholds previously set are displayed. If the
key or the key to change the increment size.
key or the key to adjust the alarm threshold.
) key to return to the previous menu.
key to save the changes. The message Data Saved appears on
key to return to the MAIN menu.
key. The STATUS menu appears on the
key.