Cisco Prisma II Installation Manual page 179

To Disable the User Password using ICIM • 79
To Enter the User Password • 76, 77
To Install the LCI Software • 108
To Install the Module in a Prisma II XD Chassis
• 53
To Install the Module in the Chassis • 52
To Install the Receiver Modules in the Host
Module • 51
To Modify Alarm Limits using LCI • 124
To Pull the Optical Cable to the Module • 58
To Restart the ICIM by Removing the ICIM • 99
To Save the Current Configuration • 95
To Set Adjustable Alarm Thresholds using the
ICIM • 92
To Set Traps for a Specific IP Address using
P2TrapRecvEntry • 101
To Set Up the IP Configuration Parameters for
SNMP Support using ICIM • 98
To Start LCI Software • 114
torque • 158
Troubleshooting • 129
Troubleshooting Alarm Conditions • 120, 129,
130
TX • 158
U
Unpacking and Inspecting the Module • 44
Using the ICIM • 81
Index
177