Prisma Ii Standard Chassis Style - Cisco Prisma II Installation Manual

Site Requirements

Prisma II Standard Chassis Style

The Prisma II standard chassis may be configured as front-access or rear-access
depending on the system you have purchased. Power, RF input or output, and other
connectors may be located on either the front or rear of the chassis. Connections to
the chassis serve the same function and are made in the same manner regardless of
the location of the connectors or chassis configuration.
Rear-Access Chassis - Front Panel Illustration
The following illustration shows the front of the rear-access Prisma II standard
chassis with two power supplies, 10 full-height modules, and the ICIM installed.
51