Operating The Icim; Using The Icim; To Access The Icim Lcd Contrast; Icim Main Menu - Cisco Prisma II Installation Manual

Chapter 3 Operation using ICIM

Operating the ICIM

Using the ICIM

Once the module is installed, it runs without the aid of an operator. Unless alarms
are generated or your system configuration changes, you should not need to make
any adjustments to the module beyond the initial setup.

To Access the ICIM LCD Contrast

To access the ICIM LCD contrast control from the MAIN menu, press the
Use the

ICIM MAIN Menu

A few seconds after power-up, the MAIN menu appears. Press the
select the specific option.
Display
Offline
Modules
Alarms
Scroll
Module
Shelf
Slot
88
key to increase or the
Description
Indicates status of communication between the ICIM and your network
management system (TNCS/RS-485).
Indicates the number of modules in the ICIM domain.
Displays the number of currently active alarms. Selecting this option
allows scrolling through all modules in alarm condition.
Allows scrolling through all modules in the ICIM domain.
Allows selection of any specific module in the ICIM domain.
key to decrease ICIM display contrast.
key.
key to