Connecting Optical Cables
Cable Routing - Prisma II Chassis
Fiber Fish Tool
WARNING:
Unterminated fiber cables and connectors may emit invisible laser radiation.
Avoid direct exposure to the laser light source. Ensure that the fiber cable is
terminated before "fishing."
The Fiber Fish tool that was shipped with the Prisma II Chassis is used to pull an
optical cable from the rear of the chassis to the front of the chassis so the optical
cables can be connected to optical connectors on the front panel of the modules.
Fiber Fish Tool Hook
At the end of the Fiber Fish tool is a small hook that allows you to hold an optical
cable so that you can pull it through to the front panel of the chassis.
Connecting Optical Cables
63