Decorative Stitches - JUKI HZL-NX7 Instruction Manual

7.9. Decorative stitches

No.
101~290
Manual buttonhole presser
301~394
foot (I)
Letters, etc.
* Refer to page 70 for the type of pattern.
■ Preparation before sewing
❶
■ How to stitch a pattern (letters)
■ Disposing thread ends of jump stitches
Presser foot
In order to beautifully sew a pattern on light-weight material
❶ , trial stitching is necessary while sticking a piece of inter-
lining on the wrong side of the material.
Use an iron to attach a fusible interlining to the wrong side of
fabric.
* If stitch length is excessively short, the bobbin thread may
Pass down the needle thread through the
presser foot hole and draw it sideways.
Place the fabric underneath the presser foot
and start.
The machine will stop automatically when sewing is finished.
* Note that the sewing speed varies according to
* If the automatic thread trimmer is used while sew-
* In case of condensed sewing, if the stitch length is
Get rid of unnecessary thread on the front side
of fabric by scissors.
Leave the machine in Lock mode
appear on the right side of material or may cause stitch
gathering.
Be sure to adjust the darning and carry out trial stitching.
Darning adjustment
Try trial sewing, adjust while checking the pattern.
(Refer to page 55)
stitch patterns (letters) to be sewn.
ing, the machine starts to sew from the beginning.
too small, the stitches may get stuck.
97